|
# hppi
****************************************************************
*****] ****
**** ]
**** JetDirect Printer Installer for UNIX
**** ]]]]] ]]]]] **** Version E.10.34
**** ] ] ] ] ****
**** ] ] ]]]]] **** Spooler Administration
***** ] ****
****** ]
**** User: (root) OS: (SunOS
5.8)
I N V E N T
****************************************************************
Spooler:
1) Add printer to local spooler
2) Delete printer from local spooler
3) Modify existing spooler queue(s)
4) Install New Model Script
5) Remove Model Script
?)
Help
q) Quit Please enter
selection: 1 Enter the network
printer name or IP address (q - quit): LPGDLCP3
!! No response from LPGDLCP3 !! ...
(trying to ping LPGDLCP3)
The HP JetDirect Printer Installer for Unix can ping the device.
The problem may be:
* incorrect GET community name!
* it is not a network printer!
* other. Do you want to
continue (y/n/q, default - n)? y There are three
choices:
1. Supply the correct community name (if this is the problem).
2. Ignore it and continue the process.
3. Supply another IP name (default) . Please select a
number (q - to config menu): 2
You have chosen to proceed. Be aware that the problem
may be encountered later. The following are
supported printer types:
1) HP LaserJet IIISi
2) HP PaintJet XL300
3) HP LaserJet 4 Plus / 4M Plus
4) HP LaserJet 5L 5)
HP LaserJet 5MP
6) HP LaserJet 5P
7) HP LaserJet 4MP
8) HP LaserJet 4P
9) HP LaserJet 4L
10) HP LaserJet 4ML
11) HP LaserJet 6MP Printer
12) HP LaserJet 6P Printer
13) HP LaserJet 6L Printer
14) HP Deskjet 2000C Printer
15) HP LaserJet 8500
16) Hewlett-Packard 2500C Series
17) HP LaserJet 1100A Printer-Copier-Scanner
18) HP LaserJet 5Si / 5SiMX
19)
HP LaserJet 4V
20) HP DeskJet 1600C
21) HP DeskJet 1600CM
22) HP LaserJet 5 23)
HP LaserJet 5M
24) HP LaserJet 5N
25) HP Color LaserJet 5
26) HP Color LaserJet 5M
27) HP Color LaserJet
28) HP DesignJet 750C
29)
HP DesignJet 750C Plus
30) HP DesignJet 755CM
31) HP DesignJet 700
32) HP DesignJet 2500CP
33) HP DesignJet 2000CP
34) HP DesignJet 3500CP
35) HP LaserJet 4000 Series
36) HP LaserJet 5000 Series
37) HP Color LaserJet 4500
38) HP DesignJet 3000CP
39) HP LaserJet 8100 Series
40) HP Mopier 320
41) Hewlett-Packard DesignJet 1050C (E sized
42) Hewlett-Packard DesignJet 1055CM (E sized
43) HP LaserJet 8000 Series
44) Hewlett-Packard LaserJet 4050 Series 45)
HP LaserJet 8150 Series
46) HP Color LaserJet 4550
47) HP LaserJet 4 / 4M
48) HP LaserJet 4Si / 4SiMX
49)
Hewlett-Packard LaserJet 2100 Series
50) HP PaintJet XL300
51) HP CopyJet / CopyJetM
52) HP DeskJet 1200C / 1200C/PS
53) HP DesignJet 650C
54) To Select dumbplot model script for plotter
55) To Select dumbplot model script for printer
56) To Select dumbplot model script for printer with
CR
57) HP PCL3 Printer not given in this list
58) HP LaserJet Printer not given in this list
59) HP Plotter not given in this list Please indicate
LPGDLCP3's printer type (q - quit): 58 Is this printer
connected to:
1) An HP XStation
2) An HP JetDirect EX (single parallel port)
3) An HP JetDirect EX Plus3 (multiple parallel ports)
4) Other Please select a
number (default-4, q - quit): 4
The following is a list of suggested parameter values for this queue.
You
may change any settings by selecting the corresponding non-zero numbers.
The values will be used to configure this queue when '0' is selected.
To abort the operation, press 'q'. Configurable
Parameters:
Current Settings -----------------------
---------------- 1) Lp
destination (queue) name [LPGDLCP3_1] 2)
Status
log
[(No log)] 3)
Queue
class
[(not assigned)] 4)
Default
queue
[NO] 5)
Additional printer configuration... Select an item for
change, or '0' to configure (q-quit): 1 Currently used
names: --------------------- AA01
JE02
LPGDLAL5 LPTGCIAS AA02
LA01
LPGDLCPD LPTGDL01 AA03CB
LAX01
LPGDLCPR LPTGDL02 AC01
LI01
LPGDLINS LPTINST AC02
LI02
LPGDLPLA LPTINST1 AC03
LP6L
LPGDLPLB LPTMOT01 AD01
LPACCE01
LPHMO01
LPTMOT02 AE01
LPACCE02
LPHMO02
LPTMOT03 AL01
LPACCE03
LPIAHOU1 LPTRC01 ALMINV01
LPACCEN
LPIAHOU2 LPTSAT01 ALX
LPAGULIN
LPING
LPTSATEL AP01CB
LPALMAC0
LPINGMOT LPTSERV AP02CB
LPALMAC1
LPINGOPR LPVER01 AP03
LPALMAC2
LPINSPEC LPWCARD AP03CB
LPALMAC3
LPINST01 LPYC AP05
LPALMAC4
LPINTE01 LPYC01 AP06
LPALMAC5
LPJEFPIL LPZEBRA AP07
LPALMAC6
LPJEST
LPZIH01 AP08
LPALMGTS
LPJTURNO ML02 AP10
LPALMGUS
LPJUAN
ML03 AP11
LPBAR
LPLELEC1 ML04 AP13
LPBJX01
LPLOGIST MO01 AP14
LPBJX02
LPMANINT MO02 AP25
LPCANON
LPMANT01 MO04 AP26
LPCCM
LPMATER MX30 AP27
LPCCM1
LPMATERL MX31 AP28
LPCNTC01
LPMATERM OH01 APZB01
LPCOD
LPMATERS PL01 AR01
LPCOMAMX
LPMID01
PLANE2 AR03
LPCOMPG
LPMTRO01 PLANEA AR04
LPCOMPG1
LPMTY01 PS16 AR05
LPCOMPT
LPMTY02 QA02 AT01
LPCOMPT1
LPOPERA1 RL01 AT02
LPCOMPT2
LPOSCAR
ROZB01 AX01
LPCOMSD
LPPFLO
SA01 CC01
LPCONFIA
LPPINT01 SA02 CC02
LPCONTA
LPPLANE1 SA04 CC03
LPCONTA1
LPPLANM SA05 CE01
LPCPRMEX
LPPLANP SB05 CE02
LPCUN01
LPPLAT01 SO01 CE03
LPCUN02
LPPMAN01 SR01 CE04
LPDIR01
LPPMANTO
SR02 CE05
LPDIRTEC
LPPTEC01 SR03 CF01
LPEDS
LPRADI01 SR04 CH01
LPEDS02
LPRADI02 SR05 CH02
LPEDS03
LPRECEP0 SR06 CM02
LPEDS05
LPRECEP1 SR07 COZB01
LPEDS06
LPRECEP2 TC01 CP02
LPEDS08
LPRECEP3 TE01 CP04
LPEDS09
LPRECTS0 TE02 CT01
LPEDSAM01
LPREN
TG01 CT02
LPEDSAM02
LPREPMA1 TG02 DP01
LPEDSEST
LPREST01 TL01 EL01
LPEDSNTS
LPRSE01 TP01 EQ01
LPELEC01
LPRTAG01 TT01 EQ02
LPELEC02
LPSERAB1 TT02 FR01
LPEMEC01
LPSERV
TT03 FR02
LPEMEC02
LPSHARP TV01 HI01
LPEQUIPO
LPSOPAER TV02 IV01
LPFREN01
LPSUPV01 VE01 IV03
LPGDLAL1
LPTALLER VM01 IV04
LPGDLAL3
LPTBATER ZB01 JE01
LPGDLAL4 LPTGCIA1 Enter the lp
destination name (default=LPGDLCP3_1, q - quit): LPGDLCP3
The following is a list of suggested parameter values for this queue.
You
may change any settings by selecting the corresponding non-zero numbers.
The values will be used to configure this queue when '0' is selected.
To abort the operation, press 'q'. Configurable
Parameters:
Current Settings -----------------------
---------------- 1) Lp
destination (queue) name [LPGDLCP3] 2)
Status
log
[(No log)] 3)
Queue
class
[(not assigned)] 4)
Default
queue
[NO] 5)
Additional printer configuration... Select an item for
change, or '0' to configure (q-quit): 0 Ready to configure
LPGDLCP3. OK to continue? (y/n/q,
default=y) y ...... Finished adding
"LPGDLCP3" to the spooler. Press the return
key to continue ...
****************************************************************
*****] ****
**** ]
**** JetDirect Printer Installer for UNIX
**** ]]]]] ]]]]] **** Version E.10.34
**** ] ] ] ] ****
**** ] ] ]]]]] **** Spooler Administration
***** ] ****
****** ]
**** User: (root) OS: (SunOS
5.8)
I N V E N T
****************************************************************
Spooler:
1) Add printer to local spooler
2) Delete printer from local spooler
3) Modify existing spooler queue(s)
4) Install New Model Script
5) Remove Model Script
?)
Help
q) Quit Please enter
selection: q
****************************************************************
*****] ****
**** ]
**** JetDirect Printer Installer for UNIX
**** ]]]]] ]]]]] **** Version E.10.34
****
] ] ] ] ****
**** ] ] ]]]]] **** M A I
N M E N U
***** ] ****
****** ]
**** User: (root) OS: (SunOS
5.8)
I N V E N T
****************************************************************
1) Spooler Administration (super-user only)
2) JetDirect Configuration (super-user only)
- TCP/IP configurable parameters
3) Diagnostics:
- diagnose printing problems
?) Help q) Quit Please enter a
selection (q - quit): q |
SEGURIDAD EN EL KERNEL /etc/system
* For certain classes of bug exploits
set noexec_user_stack = 1
* Log attempted exploits
set noexec_user_stack_log = 1
* File Descriptor parameter set for SAP
set rlim_fd_cur=2048
set rlim_fd_max=2048
* ZFS arch cache to 128G RAM
set zfs:zfs_arc_max=4294967296
